glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 170a peak ideal for printed circuit board applications plastic material - ul flammability classification 94v-0 ul listed under recognized component index, file number e94661 single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified case: molded plastic terminals: plated leads, solderable per mil-std-202, method 208 polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum approx. weight: 4.6 grams marking: type number _ a b d j k c e g h l m n p r kbj dim min max a 24.80 25.20 b 14.70 15.30 c 4.00 nominal d 17.20 17.80 e 0.90 1.10 g 7.30 7.70 h 3.10 3.40 j 3.30 3.70 k 1.50 1.90 l 9.30 9.70 m 2.50 2.90 n 3.40 3.80 p 4.40 4.80 r 0.60 0.80 all dimensions in mm characteristic symbol kbj 6005g kbj 601g kbj 602g kbj 604g kbj 606g kbj 608g kbj 610g unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectified output current @ t c = 110c i o 6.0 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load (jedec method) i fsm 170 a forward voltage per element @ i f = 3.0a v fm 1.0 v peak reverse current @t c = 25c at rated dc blocking voltage @ t c = 125c i rm 5.0 500 a i 2 t rating for fusing (t < 8.3ms) (note 3) i 2 t 120 a 2 s typical junction capacitance per element (note 1) c j 80 pf typical thermal resistance (note 2) r jc 1.5 c/w operating and storage temperature range t j ,t stg -65 to +150 c notes: 1. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 2. thermal resistance from junction to case per element. unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. 3. non-repetitive, for t > 1ms and < 8.3ms. kbj6005g-kbj610g 6.0a glass passivated bridge rectifier features mechanical data http://www.luguang.cn mail:lge@luguang.cn
0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 1.8 v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics f i , instantaneous forward current (a) f t = 150c j t = 25c j pulse width = 300s 0 40 80 120 160 180 1 10 100 i , peak fwd surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive sur g e current t = 150c j single half-sine-wave (jedec method) 10 100 1000 0.1 1.0 10 100 c , junction capacitance (pf) j v , reverse voltage (v) fi g .4 t y pical junction capacitance r f = 1mhz t = 25c j 0.1 1.0 10 100 1000 02040 6080 100 120 140 i , instantaneous reverse current (a) r percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics t = 150c j t = 125c j t = 100c j t = 25c j 0 1 2 3 4 5 6 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature (c) fi g . 1 forward current deratin g curve c with heatsink without heatsink resistive or inductive load kbj6005g-kbj610g 6.0a glass passivated bridge rectifier
|
